debug-level NOTICE
threads 2

input-file-type CSV
input-abscissa-type CRANK_ANGLE

number-of-channels 4
number-of-cycles 300
resolution 1

engine name "Rover V8"
engine bore 94.0
engine stroke 71.1
engine conrod_length 160.0
engine pin_offset 0.0
engine compression_ratio 9.4
engine strokes 4
engine type SI
engine cylinders 8
engine ivc_ca -128
engine evo_ca 128

input-file roverv8-2000rpm-wot.txt

channel 0 name CYLPR1
channel 0 description "Cylinder 1 Pressure"
channel 0 type CYLPR
channel 0 units bar
channel 0 tdc_offset 0
channel 0 slope 10.0
channel 0 offset 0.0
channel 0 filtering_type 0
channel 0 soc type SPECIFY
channel 0 soc value -20.0
channel 0 channel-offset type POLYTROPIC
channel 0 channel-offset calc_interval 11
channel 0 channel-offset start_window -100.0
channel 0 channel-offset finish_window -65.0
channel 0 channel-offset polytropic_index 1.32

channel 1 name CYLPR7
channel 1 description "Cylinder 7 Pressure"
channel 1 type CYLPR
channel 1 units bar
channel 1 tdc_offset 540
channel 1 slope 10.0
channel 1 offset 0.0
channel 1 filtering_type 0
channel 1 soc type SPECIFY
channel 1 soc value -20.0
channel 1 channel-offset type POLYTROPIC
channel 1 channel-offset calc_interval 11
channel 1 channel-offset start_window -100.0
channel 1 channel-offset finish_window -65.0
channel 1 channel-offset polytropic_index 1.32

channel 2 name MANPR
channel 2 description "Manifold Pressure"
channel 2 type INLETPR
channel 2 units bar
channel 2 tdc_offset 0
channel 2 slope 0.32
channel 2 offset 0.0
channel 2 filtering_type 0

channel 3 name ENG_N
channel 3 description "Engine Speed"
channel 3 type ENG_SPEED
channel 3 units RPM
channel 3 tdc_offset 0
channel 3 slope -2.7812
channel 3 offset 795.57
channel 3 filtering_type 0

load-channels all

load-file

set eeoc_start_window 10.0
set eeoc_finish_window 130.0
set eeoc_index 1.15
set t_ivc -20.0
set temp_ref_ca -40.0
set mfb_n 1.32
set annand_a 0.45
set t_wall 450.0
set R 287.0
set poly_exp_start_angle 60.0
set poly_exp_finish_angle 100.0
set poly_comp_start_angle -70.0
set poly_comp_finish_angle -30.0
set pkp_start_angle 0.0
set pkp_finish_angle 40.0
set pkp_smoothing_resolution 5
set pkp_smoothing_range 2.0
set cd_start_angle 0.0
set cd_finish_angle 40.0
set engine_speed_type CHANNEL_AVERAGE
set engine_speed_channel 3
set heat_release_model FIRST_LAW
set heat_transfer_model WOSCHNI

analyse none
run-analysis

output-file roverv8-2000rpm-wot.dat
output-file-type AVL_IFILE
output-data CA_RAW
output